Ducati SS1000DS - Page 39

Caratteristiche tecniche
Technical specification
sezione / section
C 1.1
11
A
B
C
D
E
F
G
H
L
M
N
P
edizione/edition 03-03
Front suspension
Rear wheel
Rear suspension
Hydraulic brakes
Reference Specifications
Type Upside-down 43-mm fork
Travel along leg axis 120 mm
Fork fully adjustable rebound, compression
and preload
Hydraulic damping standard setting
Turn out the adjuster from fully closed
position (clockwise)
11 clicks - compression
7 clicks - rebound
Spring preload 18 mm
Recommended amount of oil in each leg 0.532 cu dm
Reference Standard value Max. allowed value
Tread min. thickness In the most worn position 2 mm
Tyre pressure Cold 2.1 bar - 2.3 Kg/sq cm
Swingarm shaft eccentricity On 100 mm 0.2 mm
Wheel rim eccentricity Radial 0.8 mm 2 mm
Axial 0.5 mm 2 mm
Chain Make
Type
RK
525 GXW
Dimensions 5/8" x 5/16”
No. of links 96
Reference Specifications
Type Progressive Cantilever with monoshock
featuring fully adjustable compression,
rebound and preload.
Shock-absorber Travel 76 mm
Hydraulic damping standard setting.
Turn out the adjuster from fully closed
position (clockwise)
10 clicks - rebound
14 clicks - compression
Preloaded spring length 180.5 mm
Wheel travel 145 mm
Reference Standard value Max. allowed value
FRONT
Brake disc Type Drilled twin disc
Thickness 4 ± 0.1 mm 3.6 mm (min.)
Material Steel
Diameter 320 mm
Braking surface 88 sq cm
Brake caliper Make Brembo
Type 30/34 - 4 pistons
Caliper cylinder diameter 30/34 mm
Pads friction material FERIT I/D 450-FF
Brake master cylinder Type PSC 16
Master cylinder diameter 16 mm
REAR
Brake disc Type Drilled disc
Thickness 4 ± 0.1 mm 3.6 mm (min.)
Material Steel
'8&PRB66B&EERRN3DJH:HGQHVGD\0DUFK30