Ducati SS1000DS - Page 77

Uso e manutenzione
Use and Maintenance operations
sezione / section
D 3
11
A
B
C
D
E
F
G
H
L
M
N
P
edizione/edition 03-03
Note
(1) Replace every two years, in any case.
(2) Check for proper tightening of the following safety parts; if improperly
tightened, please refer to torque setting tables (Sect. C 3).
- Engine-to-frame screw fixing nut
- Front wheel nut
- Rear wheel nut
- Steering head screws
- Bottom yoke screws
- Handlebars screw
- Fork pinch bolts
- Frame-to-shock absorber screw
- Swingarm pivot shaft screw
- Front brake caliper screw
- Front brake disc screw
- Rear brake caliper screw
- Rear brake disc screw
- Rear brake screw
- Driving pins screw
- Fairing fixing nuts
(3) Test the following parts:
- Wheel hub bearings
- Rear wheel flexible coupling
- Sprocket retaining plate
- Side stand
- Indicators and lighting devices
'8&PRB66B'EERRN3DJH7KXUVGD\0DUFK30