Technical data
176 Operating Instructions 581 - 01.0 - 05/2016
Application
• Sewing buttonholes with or withou
t an eye, with taper bar,
round tack, cross tack or without a bartack
• Sewing of eyelets
Sewing material
Material comprised of textil
e or synthetic fibers
Equipment
• Thread cutter
• electronically regulated thread tension
• different thread cutting systems
depending on subclass
Looper
• 2 chain stitch loopers, with the left thread leading (buttonholer)
• 2 chain stitch blind loopers (eyelet maker)
Technical features
The machine is fitted with the Compac
t Servo positioning drive,
which is integrated in the machine arm.
A stepper motor drives the movements for each of th
e axes X, Y
and Z. These drives are controlled via the electronic control DAC
comfort in combination with different pneumatic machine functions.
To Next Page
Loading...
