Technical data
178 Operating Instructions 581 - 01.0 - 05/2016
• Step by step feature within the buttonhole cycle to check the
function sequences
• the OP5000
control panel (graphics-capable LCD display with
membrane keyboard) is mounted to the right on the sewing
head and is easily accessible to the user
• Adjustable functions:
• Cutting before or after sewing
• No slitting
• Choice of buttonhole shape:
• With or without an eye
• Without bartack
• With taper bar
• With round tack
• With cross tack
• Taper bar length
• Eye shape
• Eye size
• Buttonhole shape
• Button operation for the following functions:
• Closing clamp and opening clamp (clamps open automat-
ically after the end of the seam)
• Switching on the sewing process
• Quick stop with needle in upper position
• Piece counter with display on the control panel for the number
of sewn buttonh
oles (daily and overall production)
• Pneumatic buttonhole slitting
• Suction for the cutting waste
• Central oil-wick system from 2 oil reservoirs
• Mechanical conversion from narrow to wide ZZ range
• Electronic changing of the zigzag stitch width (+/-0.5 mm) in
the bu
ttonhole seam and the eye
• Electronic setting of the intermediate material width
• Modern, ergonomically cost effective desig
n within the current
DA design line
• Large-surface fabric support plate with large recess depth for
the dist
ance between the buttonhole and the sewing material
edge
To Next Page
