Operation
Operating Instructions 581 - 01.0 - 05/201626
Fig. 10: Threading the needle thread (2)
Fig. 11: Threading the needle thread (3)
2. To thread the needle thread, push the threading wire (in the
accessory pack) through the hollow needle bar (7) from the
bottom upwards.
3. Hang the needle thread at the top behind the hook (4).
4. Pull the needle thread down with the threading wire.
5. Guide the needle thread to the left behind the tension disk (5)
and
thread it into the needle from the back to the front.
(2) - Needle thread tensioner element
(3) - Thread guide (4) - Looper
To Next Page
Loading...
