Programming
Operating Instructions 581 - 01.0 - 05/201648
Fig. 32: Single buttonhole mode
It is possible to see which field is active by the white lettering on
a dark background.
For subclasses 312, 321 and 341, there
is also monoflex mode,
as 2 blade positions are possible.
Active monoflex mode is indicated by display of a bar next to the
b
uttonhole shape:
Fig. 33: Monoflex mode
(8) - Buttonhole number
(9) - Blade position 1 (10)- Blade position 2
To Next Page
Loading...
