Durst Rho 1012 - Page 78

E Operation Rho 1012/1030
Fig. 42 Securing the axis with a sliding ring
8. Secure both axis ends as follows:
– Disengage locking button (2).
– Slide sliding ring (1) over the axis end.
– Lock locking button.
10.3.3 Inserting emp ty core on the
unloading side
Insert empty core to wind up the roll medium in the same manner as the
roll medium on the loading side.
78 / 1 47 2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 101 2/103 0, Issued 07/20 13