MAINTENANCE, SERVICE AND FAULT FINDING
25364 Issue 8 March 2018 4-45
1052 Error incompatible
version
Only on 21CFR - Part 11 compliant
controllers:
The design being loaded is too new
(and hence the controller does not
know how to handle it) or too old
(created without CRC checksum).
Upgrade the controller to a newer
version.
1053 Error unknown log
type
Problems with the log feature.
1054 Error log id missing Problems with the log feature.
1055 Nothing to save Saving of design file is not required.
1056 Saving design Ensure the user has proper access
rights to save the file and that the
destination is accessible.
1057 Not authorised to... Log in as a user with appropriate
access rights and retry operation.
1058 Align Print Head
Failed
Verify that the printer is correctly
mounted and the print head is not
obstructed.
1059 Unsupported feature Will continue to print but without the
unsupported feature that is being
disputed.
1060 File not found A file is not found. Check the filename.
1061 No external flash
detected
Some operations require an external
flash card. No external flash card is
detected.
Abort the operation.
If required insert a Compact Flash Card
while the power is switched off.
1062 Error Writing File Error while writing a file to disk. Check
for free space.
1063 Low Space on
System Disk
The system disk is running low on free
space.
Databases and images transferred to
the controller can consume a lot of
space.
Lost fragments in the file system (i.e., if
an upgrade fails due to power loss) can
also be the case.
1064 Critical Low Space on
System Disk
The system disk is running critically low
on free space - see above.
Error No. Error Text Action
To Next Page
Loading...
