EasyManua.ls Logo

Ecotech Acoem Serinus 30 - Page 213

Ecotech Acoem Serinus 30
225 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix
Added as of Build 10800 (V3.87.0 or later)
13 = “2 Mins”
14 = “4 Mins”
15 = “6 Mins”
16 = “12 Mins”
17 = “20 Mins”
18 = “2 Hrs”
19 = “6 Hrs”
164
Filter Type
0 = NO FILTER
1 = KALMAN FILTER
2 = 10 SEC FILTER
3 = 30 SEC FILTER
4 = 60 SEC FILTER
5 = 90 SEC FILTER
6 = 300 SEC FILTER
7 = ADPTIVE FILTER
165
NO2 Filter enabled
0 = Disabled, 1 = Enabled
166
Background Interval
0 = 24 Hrs
1 = 12 Hrs
2 = 8 Hrs
3 = 6 Hrs
4 = 4 Hrs
5 = 2 Hrs
6 = Disable
Note: this parameter is deprecated; while it can still be read,
writing to it will have no effect. Use parameter 144 instead.
167
Service (COM1) Baud
Serial baud rate
0 = 1200 bps
1 = 2400 bps
2 = 4800 bps
3 = 9600 bps
4 = 14400 bps
5 = 19200 bps
6 = 38400 bps
168
Multidrop (COM2) Baud
169
Service Protocol
0 = EC9800
1 = Bayern-Hessen
2 = Advanced
3 = Modbus
170
Multidrop Protocol
171
AO1 Over Range
The Upper Concentration Range when Over-Ranging is
enabled
172
AO2 Over Range
173
AO3 Over Range
174
AO1 Over-Ranging
0 = Over Ranging Disabled

Table of Contents

Related product manuals