EDAN Acclarix LX9 Series User Manual

- 5 -
Acclarix LX9 Series Diagnostic Ultrasound System User Manual
Safety
 Do not exert excessive vibrations onto the system. Otherwise, it may damage the mechanical
components (such as wheels). If the system is required to move on an uneven surface
frequently, consult EDAN or authorized representatives for service.
 Read and understand the Appendix B.2 Ultrasound Safety and the ALARA Principle before
using the system. Do not expose a patient to ultrasound energy longer than clinically
reasonable.
 Practice ALARA principle when operating ultrasound system. Minimize the acoustic power
without compromising the image quality.
 Do not use in the presence of a flammable anesthetic.
 The system generates radio frequency energy, which may cause interference with other
devices in the vicinity. If interference is suspected, try re-orienting or relocating the equipment.
 The use of electrosurgical units or other devices that generate radio frequency interference
may cause image distortion or other malfunctions.
 The system should only be used by a qualified physician or allied health professional for
ultrasound evaluations.
 Use only Edan supplied or recommended parts and accessories.
 Verify measurement results prior to entering them into a report.
 Contact your local distributor or Edan Service if there is excessive noise from the system
speaker or fans.
 Please read and understand cleaning instructions prior to use.
 Please read and understand maintenance instructions prior to use.
 Please read and understand instructions for system operation prior to use.
 The system is not intended for long term storage for patient data and image. Studies stored on
the system hard drive should be archived regularly, avoiding accident damage or loss. Confirm
successful archiving before deleting a study from the hard drive.
 Ensure that the system vents are clear and unobstructed.
 Confirm patient identification information prior to storing or printing any exam information.
 If you have any question about maintenance, technical specifications, or system functionality,
please contact your local distributor or Edan Service at: support@edan.com
 Ultrasound images occasionally have artifacts, and should only be used as one part of an
overall clinical assessment.
 To avoid electrical shock, turn off and disconnect the device from the AC power source before
cleaning and disinfecting.
 No user serviceable parts are inside the system. All repairs on the system must be performed
by EDAN certified service personnel.
 The device and accessories are to be disposed of according to local regulations after their
useful lives. Alternatively, they can be returned to the dealer or the manufacturer for recycling
or proper disposal.
 The packaging is to be disposed of according to local or hospital‟s regulations; otherwise, it
may cause environmental contamination. Place the packaging at the location that is
inaccessible to children.
 Properly dispose of used cleaning agents or disinfectants according to your hospital's

EDAN Acclarix LX9 Series Specifications

General

Brand	EDAN
Model	Acclarix LX9 Series
Category	Diagnostic Equipment
Language	English