76
3. Using the "Dynamic MAC to Static MAC" link Bulk Bind static MAC
In the MAC address list by checking the front of the column you want to bind, "ā" check box, click on the "Dynamic
MAC to Static MAC" button to complete the configuration:
Figure 7-11: Batch-MAC Binding Configuration
7.1.7.3 Remove the static MAC address type
1. Single MAC records are deleted
Select the need to delete the MAC address, click the "X" button to delete a static MAC address type:
Figure 7-12: MAC Address Deletion
Remove MAC address configuration steps are as follows:
Step 1: To delete the selected MAC address;
Step 2: Click " " button to delete the configuration.
To Next Page
Loading...
Need help?
General