C
HAPTER
29
| Congestion Control Commands
Automatic Traffic Control Commands
– 1036 –
EXAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#snmp-server enable port-traps atc multicast-control-
release
Console(config-if)#
RELATED COMMANDS
auto-traffic-control alarm-clear-threshold (1029)
auto-traffic-control action (1028)
auto-traffic-control release-timer (1026)
ATC Display Commands
show auto-traffic-
control
This command shows global configuration settings for automatic storm
control.
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show auto-traffic-control
Storm-control: Broadcast
Apply-timer (sec) : 300
release-timer (sec) : 900
Storm-control: Multicast
Apply-timer(sec) : 300
release-timer(sec) : 900
Console#
show auto-traffic-
control interface
This command shows interface configuration settings and storm control
status for the specified port.
SYNTAX
show auto-traffic-control interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
COMMAND MODE
Privileged Exec
To Next Page
Loading...
Need help?
General
