C
HAPTER
32
| Address Table Commands
– 1053 –
EXAMPLE
Console(config)#mac-address-table static 00-e0-29-94-34-de interface ethernet
1/1 vlan 1 delete-on-reset
Console(config)#
clear
mac-address-table
dynamic
This command removes any learned entries from the forwarding database.
DEFAULT SETTING
None
COMMAND MODE
Privileged Exec
EXAMPLE
Console#clear mac-address-table dynamic
Console#
show
mac-address-table
This command shows classes of entries in the bridge-forwarding database.
SYNTAX
show mac-address-table [address mac-address [mask]]
[interface interface] [vlan vlan-id]
[sort {address | vlan | interface}]
mac-address - MAC address.
mask - Bits to match in the address.
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
vlan-id - VLAN ID (Range: 1-4094)
sort - Sort by address, vlan or interface.
DEFAULT SETTING
None
COMMAND MODE
Privileged Exec
To Next Page
Loading...
Need help?
General
