C
HAPTER
38
| Multicast Filtering Commands
IGMP Filtering and Throttling
– 1226 –
COMMAND MODE
Privileged Exec
COMMAND USAGE
Using this command without specifying an interface displays information
for all interfaces.
EXAMPLE
Console#show ip igmp throttle interface ethernet 1/1
Eth 1/1 Information
Status : TRUE
Action : Deny
Max Multicast Groups : 32
Current Multicast Groups : 0
Console#
show ip
multicast-data-drop
This command shows if the specified interface is configured to drop
multicast data packets.
SYNTAX
show ip igmp throttle interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
DEFAULT SETTING
None
COMMAND MODE
Privileged Exec
COMMAND USAGE
Using this command without specifying an interface displays all interfaces.
EXAMPLE
Console#show ip multicast-data-drop interface ethernet 1/1
Ethernet 1/1: Enabled
Console#
To Next Page
Loading...
Need help?
General
