C
HAPTER
38
| Multicast Filtering Commands
MVR for IPv4
– 1263 –
show mvr profile This command shows all configured MVR profiles.
COMMAND MODE
Privileged Exec
EXAMPLE
The following shows all configured MVR profiles:
Console#show mvr profile
MVR Profile Name Start IP Addr. End IP Addr.
-------------------- --------------- ---------------
rd 228.1.23.1 228.1.23.10
testing 228.2.23.1 228.2.23.10
Console#
show mvr statistics This command shows MVR protocol-related statistics for the specified
interface.
SYNTAX
show mvr [domain domain-id] statistics
input [interface interface] | output [interface interface] |
query | summary interface [interface | mvr-vlan]
domain-id - An independent multicast domain. (Range: 1-5)
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
vlan vlan-id - VLAN ID (Range: 1-4094)
query - Displays MVR query-related statistics.
summary - Displays summary of MVR statistics.
mvr vlan - Displays summary statistics for the MVR VLAN.
DEFAULT SETTING
Displays statistics for all domains.
Expire The time until this entry expires.
Count The number of times this address has been learned by IGMP
snooping.
Table 163: show mvr members - display description (Continued)
Field Description
To Next Page
Loading...
Need help?
General
