C
HAPTER
40
| CFM Commands
Continuity Check Operations
– 1335 –
DEFAULT SETTING
None
COMMAND MODE
Privileged Exec
COMMAND USAGE
Use this command without any keywords to clear all entries in the CCM
database. Use the domain keyword to clear the CCM database for a
specific domain, or the level keyword to clear it for a specific maintenance
level.
EXAMPLE
Console#clear ethernet cfm maintenance-points remote domain voip
Console#
clear ethernet cfm
errors
This command clears continuity check errors logged for the specified
maintenance domain or maintenance level.
SYNTAX
clear ethernet cfm errors [domain domain-name | level level-id]
domain-name – Domain name. (Range: 1-43 alphanumeric
characters)
level-id – Maintenance level. (Range: 0-7)
DEFAULT SETTING
None
COMMAND MODE
Privileged Exec
COMMAND USAGE
Use this command without any keywords to clear all entries in the error
database. Use the domain keyword to clear the error database for a
specific domain, or the level keyword to clear it for a specific maintenance
level.
EXAMPLE
Console#clear ethernet cfm errors domain voip
Console#
To Next Page
Loading...
