C
HAPTER
14
| Basic Administration Protocols
Switch Clustering
– 486 –
Figure 280: Showing Cluster Candidates
MANAGING
CLUSTER MEMBERS
Use the Administration > Cluster (Show Member) page to manage another
switch in the cluster.
CLI REFERENCES
◆ "Switch Clustering" on page 765
PARAMETERS
These parameters are displayed:
◆ Member ID – The ID number of the Member switch. (Range: 1-36)
◆ Role – Indicates the current status of the switch in the cluster.
◆ IP Address – The internal cluster IP address assigned to the Member
switch.
◆ MAC Address – The MAC address of the Member switch.
◆ Description – The system description string of the Member switch.
◆ Operate – Remotely manage a cluster member.
To Next Page
Loading...
