C
HAPTER
14
| Basic Administration Protocols
Connectivity Fault Management
– 540 –
◆ Suppress Alarm – Shows if the specified MEP is configured to
suppress sending frames containing AIS information following the
detection of defect conditions.
◆ Suppressing Alarms – Shows if the specified MEP is currently
suppressing sending frames containing AIS information following the
detection of defect conditions.
WEB INTERFACE
To show detailed information for the MEPs configured on this device:
1. Click Administration, CFM.
2. Select Show Information from the Step list.
3. Select Show Local MEP Details from the Action list.
4. Select an entry from MD Index and MA Index.
5. Select a MEP ID.
Figure 309: Showing Detailed Information on Local MEPs
To Next Page
Loading...
Need help?
General
