C
HAPTER
20
| System Management Commands
Time
– 759 –
clock summer-time
(recurring)
This command allows the user to manually configure the start, end, and
offset times of summer time (daylight savings time) for the switch on a
recurring basis. Use the no form to disable summer-time.
SYNTAX
clock summer-time name recurring b-week b-day b-month b-hour
b-minute e-week e-day e-month e-hour e-minute [offset]
no clock summer-time
name - Name of the timezone while summer time is in effect,
usually an acronym. (Range: 1-30 characters)
b-week - The week of the month when summer time will begin.
(Range: 1-5)
b-day - The day of the week when summer time will begin.
(Options: sunday | monday | tuesday | wednesday |
thursday | friday | saturday)
b-month - The month when summer time will begin.
(Options: january | february | march | april | may | june |
july | august | september | october | november | december)
b-hour - The hour when summer time will begin. (Range: 0-23
hours)
b-minute - The minute when summer time will begin. (Range: 0-59
minutes)
e-week - The week of the month when summer time will end.
(Range: 1-5)
e-day - The day of the week summer time will end. (Options:
sunday | monday | tuesday | wednesday | thursday | friday |
saturday)
e-month - The month when summer time will end. (Options:
january | february |
march | april | may | june | july |
august | september | october | november | december)
e-hour - The hour when summer time will end. (Range: 0-23 hours)
e-minute - The minute when summer time will end. (Range: 0-59
minutes)
offset - Summer-time offset from the regular time zone, in minutes.
(Range: 0-99 minutes)
DEFAULT SETTING
Disabled
COMMAND MODE
Global Configuration
COMMAND USAGE
â—† In some countries or regions, clocks are adjusted through the summer
months so that afternoons have more daylight and mornings have less.
This is known as Summer Time, or Daylight Savings Time (DST).
To Next Page
Loading...
Need help?
General
