C
HAPTER
25
| Access Control Lists
IPv6 ACLs
– 955 –
show ipv6
access-group
This command shows the ports assigned to IPv6 ACLs.
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show ipv6 access-group
Interface ethernet 1/2
IPv6 standard access-list david in
Console#
RELATED COMMANDS
ipv6 access-group (954)
show ipv6
access-list
This command displays the rules for configured IPv6 ACLs.
SYNTAX
show ipv6 access-list {standard | extended} [acl-name]
standard – Specifies a standard IPv6 ACL.
extended – Specifies an extended IPv6 ACL.
acl-name – Name of the ACL. (Maximum length: 16 characters)
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show ipv6 access-list standard
IPv6 standard access-list david:
permit host 2009:DB9:2229::79
permit 2009:DB9:2229:5::/64
Console#
RELATED COMMANDS
permit, deny (Standard IPv6 ACL) (951)
permit, deny (Extended IPv6 ACL) (952)
ipv6 access-group (954)
To Next Page
Loading...
Need help?
General
