127
SEQ Hot Key
Following is a menu diagram for the SEQ hot key. This menu diagram is for a system with only one sequencer. If
the system has more than one sequencer, multiple sequencer setup selections will be available. Additional menu
selections for control setpoints, control groups, and high alarm setpoints are present if the system contains
multiple system control parameters.
SEQ
1. SEQUENCER CONTROL
2. SETPOINTS
3. LEAD LIST
4. CNTRL GROUP SELECT
5. SCHEDULING
1. SCHEDULE SETUP
2. DAILY SCHEDULE
1. SCHEDULE 01
2. SCEHDULE 02
1. SCHEDULE 07
6. HIGH ALARM
SEQ Menu Diagram
To Next Page
Loading...
