87
Clear All Logs
The CLEAR ALL LOGS menu entry provides a method of erasing all the data currently
contained in all the logs available on your system. After choosing to clear all logs the
user will be prompted by a confirmation screen to verify the selection. If the user
decides to continue with the clearing of the logs, a momentary screen will appear with a
message stating that the logs have been erased. The action of clearing the logs
requires a special password. The message “ACCESS DENIED” indicates that the user
does not have privilege to perform this function. If a standard user password will not
allow access to clear the logs, contact your control system provider for assistance.
Set Log Rate
The SET LOG RATES menu entry allows the user to set the rate in minutes for collection of
the logging data. The Trend Log Rate (standard) can be set to the rate in minutes which is
most desirable for your system and operational needs.
To Next Page
Loading...
