80
The following table lists the data entry fields and a description of their purposes.
TERM DEFINITION RANGE
AUTO START/STOP When Auto Start/Stop is Enabled, the compressor ENABLE/
will start and stop automatically in the Automatic and DISABLE
Auto-Remote modes.
POWER FAIL RESART When Power Fail Restart is Disabled, the compressor ENABLE/
will be forced off-line after a power failure occurs. DISABLE
When Enabled, the compressor will be available to
auto-restart as long as the power has not been off for
longer than the Power Fail Restart Delay.
POWER FAIL RESTART This is the maximum amount of time a compressor is 0 - 999 MIN
DELAY allowed to be without power before being allowed to
auto-restart when the power returns.
ANTI-CYCLE TIME This is the amount of time that the compressor will be 1-30 MIN
able to restart after the STOP hot key is pushed.
LOGS Hot Key
The LOGS hot key is fully described in Chapter 3, Logging Functions.
MENUS Hot Key
The MENUS hot key is fully described in Chapter 4, Menu Functions.
Miscellaneous Control Definitions
To Next Page
Loading...
