ero electronic MKP - OUT 5 Filter on the Retransmitted Value; OUT 5 Retransmission Full Scale Value; OUT 6 Function; OUT 6 Range

39
CnF. 2CnF. 2 CnF. 2CnF. 2
CnF. 2
- OUT 5 retransmission full scale value- OUT 5 retransmission full scale value
- OUT 5 retransmission full scale value- OUT 5 retransmission full scale value
- OUT 5 retransmission full scale value
- [C.E10]- [C.E10]
- [C.E10]- [C.E10]
- [C.E10]
This parameter will be available only when Out 5 function
[C.E07] is configured as “PV.rt” or “SP.rt”
Range:From -1999 to 9999
NOTENOTE
NOTENOTE
NOTE: Decimal point is positioned as previously selected at
“CnF.1 - ñ.In.d” [C.d03])
- OUT 5 filter on the retransmitted value- OUT 5 filter on the retransmitted value
- OUT 5 filter on the retransmitted value- OUT 5 filter on the retransmitted value
- OUT 5 filter on the retransmitted value
- [C.E11]- [C.E11]
- [C.E11]- [C.E11]
- [C.E11]
This parameter will be available only when OUT 5 is configured
as process variable retransmission ("O5.Fn" [C.E07] is equal to
“PV.rt”).
Range: From 0 (no filter) to 8 seconds
NOTENOTE
NOTENOTE
NOTE: this is a first order digital filter applied to the
retransmitted output value.
- OUT 6 function - [C.E12]- OUT 6 function - [C.E12]
- OUT 6 function - [C.E12]- OUT 6 function - [C.E12]
- OUT 6 function - [C.E12]
Range:nonE = Output not used
ñAin = Main control output (linear)
SECn = Secondary control output (linear)
PV.rt = Process variable retransmission
SP.rt = Operative set point retransmission
NOTENOTE
NOTENOTE
NOTE: When the option circuitry is not mounted the middle
display will show “no.Pr” (not present).
- OUT 6 range - [C.E13]- OUT 6 range - [C.E13]
- OUT 6 range - [C.E13]- OUT 6 range - [C.E13]
- OUT 6 range - [C.E13]
This parameter will be available only when Out 6 is configured
("O6.Fn" [C.E12] different from "nonE")
Range:0-20 = 0÷20 mA
4-20 = 4÷20 mA
- OUT 6 retransmission initial scale value- OUT 6 retransmission initial scale value
- OUT 6 retransmission initial scale value- OUT 6 retransmission initial scale value
- OUT 6 retransmission initial scale value
- [C.E14]- [C.E14]
- [C.E14]- [C.E14]
- [C.E14]
This parameter will be available only when Out 6 function
[C.E12] is configured as “PV.rt” or “SP.rt”
Range:From -1999 to 9999
NOTESNOTES
NOTESNOTES
NOTES:
1) Decimal point is positioned as previously selected at “CnF.1
- ñ.In.d” [C.d03])
2) The OUT 6 retransmission initial scale value can be higher
than OUT 6 retransmission full scale value [C.E.15].
XKP-1-D1.pmd 25/05/2006, 11.2839