ero electronic MKP - Main Output Auxiliary Conditioning; Secondary Control Output Conditioning

46
CnF. 3CnF. 3 CnF. 3CnF. 3
CnF. 3
- Main output auxiliary conditioning - [C.F11]- Main output auxiliary conditioning - [C.F11]
- Main output auxiliary conditioning - [C.F11]- Main output auxiliary conditioning - [C.F11]
- Main output auxiliary conditioning - [C.F11]
This parameter will be available only when main control output
is configured and “ñC.Cn” ("Main control output conditioning"
[C.F06]) is different from “norñ”.
Range:bEFr = The functions listed at Note (*) are calculated
before before
before before
before to apply the action selected by “ñC.Cn”
("Main control output conditioning" [C.F06])
parameter.
AFtr = The functions listed at Note (*) are calculated
after after
after after
after to apply the action selected by “ñC.Cn”
(“Main control output conditioning” [C.F06])
parameter.
Note (*)Note (*)
Note (*)Note (*)
Note (*)
- "Main control output limiters" - for more details see [r.E04]
and [r.E05] parameters.
- "Main control output max rate of rise" (see [r.E06]).
- "Control output display value" - for more details see "Display
function during programmer mode" paragraph at pag. 106
and [C.F07], [C.F08], [C.F09] and [C.F10] parameters.
- "Threshold for alarm on control output value" - for more
details see [r.F01], [r.F05] [r.F09] and [r.F13] parameters.
- The control output value displayed by bargraph.
- Secondary control output conditioning- Secondary control output conditioning
- Secondary control output conditioning- Secondary control output conditioning
- Secondary control output conditioning
- [C.F12]- [C.F12]
- [C.F12]- [C.F12]
- [C.F12]
This parameter will be available only when secondary control
output is configured.
Range:norñ = The control output is calculated by the PID
CñPL = The control output is complemented (100-PID
calculated value)
Ouic = The control output is conditioned to match a
“QUICK OPENING” flow characteristic
Eou = The control output is conditioned to match an
“EQUAL PERCENTAGE” flow characteristic
For more details see also
NOTE about output conditioning NOTE about output conditioning
NOTE about output conditioning NOTE about output conditioning
NOTE about output conditioning at
page 44.
XKP-1-D1.pmd 25/05/2006, 11.2846