Euphonix Max Air - Page 101

Euphonix Max Air Mixing Console Operation Manual Channels and Strips
101
Filter Type (F1tp, F2tp): Select from four filter types low-pass filter (LPF), high-pass
filter (HPF), band-pass filter (BPF), and notch filter (NTCH). The lower key to the left
of the filter type knob switches each filter in/out.
Filter Q (F1Q, F2Q): The band-pass and notch filters have a variable Q from 0.2 to 12.
This function has no effect on high- or low-pass filter types.
Filter Frequency (F1fr, F2fr): The frequency range is 20.5 Hz to 21 kHz.
Listen: To help find problematic frequencies, the Notch filter can be put into a band-
pass mode by pressing the Listen key to the lower left of the Filter Frequency knob. The
boost setting is not saved in the Title and defaults to Off.