Euphonix Max Air Mixing Console Operation Manual Touchscreen
73
Safety
The Safety section includes two buttons that can be set independently:
• Bus Lock: Disables the following functions when activated: Bus Levels (Main
Master, Master Trims, and Leg Trims), Bus Inserts, Bus On/Off keys.
While these functions are disabled, their values may still be interrogated.
• Monitor Lock: Disables the Control Room and Monitor levels. Dim and Cut al-
ways remain active.
Clock Source
The on-screen clock can be set to Internal or External.
Select External to synchronize to a facility called “Time of day” clock using LTC.
1. Connect LTC to the LTC input of the system MIDI interface.
2. From the Main Menu, press System.
3. Set the Clock Source to External.
4. Select the desired display format from Clock Display Format.
Clock Display Format
Allows the clock to be displayed in three formats: 12, 24 hour, HH:MM:SS:FF.
Misc
Show Router Names: This enables the router mnemonics feature (see page 58).
Group Bus as Mix Minus: Activating this button inverts the group bus assignment in-
dicators so channels NOT assigned to the bus are lit.
4.6.5 About
Select the About button in the lower-right corner of the System View to display soft-
ware version information and a Shutdown button. Touching the Shutdown button does
not prompt you to save changes, so be sure to save before exiting the program (see Op-
erations on the Current Title on page 52). You can also use the keystrokes Ctrl-Alt-*
simultaneously. The * is from the numeric keypad not Shift-8.