Euphonix Max Air User Manual

Euphonix Max Air Mixing Console Operation Manual Channels and Strips
105
5.4 Channel Processor Order and Patch Points
The seven channel processors can be placed in any order to suit different applications.
The default order is Delay, Metering, Insert, EQ, Filters, Dynamics, and Fader. The ten
patch points are A Input, B Input, Insert Send/Return, Pre-fader Output, Post-fader
Channel Output, Dynamics Key Input, Dynamics Side-Chain Link In/Out and Mix Mi-
nus Output. All patching can be done from the Patch View (see Patch on page 54).
Figure 5-15 Channel processor order and patch points
5.4.1 Channel Processor Order
See Process Order on page 80 for information on changing the processor order.
5.4.2 Insert Point
Each channel has an insert point with a send and return that can be patched within the
Patch View. The insert point can be anywhere among the six other processors (Delay,
Metering, EQ, Filters, Dynamics, and Fader).
The insert point can be switched in/out using the Ins/Inp Knobset Select key when In/
Out is selected.
EQ
Function
4 of 7
Function
5 of 7
Function
6 of 7
Function
7 of 7
Pre-Fader
Output
Solo
PFL/AFL
Aux
Sends
Group Busses
Matrix/Clean Feeds
Main Busses
Program/Sub Groups
System Buses
Channel Output
Mix Minus Output
Fader
& Mute
Any
Order
Insert
Function
3 of 7
Function
2 of 7
Delay
DYN
Pan
Pan
Key
Link
Trim & Phase
Input Select
Channel Inputs
A
B
Function
2 of 8
Function
1 of 7
Meter
Mix Minus
Processing
Filters

Euphonix Max Air Specifications

General

Brand	Euphonix
Model	Max Air
Category	Music Mixer
Language	English