Euphonix Max Air Mixing Console Operation Manual Busses
113
A useful application of the Format Selector is to change the order of channels used to
accommodate different standards (i.e., L,R,C,B,Sl,Sr instead of L,C,R,Sl,Sr,B). Any
format can be re-ordered but the following example sets a 5.1-channel mix to an arbi-
trary order:
1. Select a Main bus.
2. Select the 5.1 format from the Format Selector.
3. Touch all channels except the first channel in your new order in the Format Se-
lector to de-select them.
4. Touch the Set Format button to set that channel to the selected bus.
5. Repeat steps 1–4 for each Main bus to reorder.
To Next Page
Loading...
