A1000 15 532210 04 - Rev.A
Translation of the original instructions
ENGLISH
ACCESSORIES
XB LOCK motor block and internal release - OPTIONAL
It acts directly on the Motor, mechanically locking it in order to maintain
the leaves in position.
Supplied with internal release device which allows emergency opening to
be performed in case of need.
Ready for installing external release.
Monitoring - OPTIONAL
The magnetic monitoring sensor detects the door status: closed/not closed
It is fitted with connector for connecting a relay (e.g. to connect an alarm
system).
The monitoring micro switch on the motor block detects any malfunction.
It is ready to remotely activate a light or sound warning.
Emergency battery - OPTIONAL
It allows the automation to operate in case of mains power failure.
SDK EVO - OPTIONAL
Programming and function selector device with display.
LK EVO - OPTIONAL
Programming and function selector device without display.
KS EVO - OPTIONAL
Device with function selector key without display.
TK50 - Sliding shoes with bracket - OPTIONAL
For fastening to wall or fixed leaf (supplied in a PAIR).
TK50 - Swivel sliding shoes - OPTIONAL
For fastening to the floor (supplied in a PAIR).
TK20 - Sliding shoes with bracket - OPTIONAL
For fastening to fixed leaf (supplied in a PAIR).
Lower guide profile - OPTIONAL
Allows the lower leaf profile to be adapted to the sliding shoe. Supplied
in 3.0 m long bars.
Upper profile for connecting the leaf - (1 for each leaf) - OPTIONAL
Accessory to adapt the upper leaf profile to the carriage connections.
Supplied in 3.0 m long bars.
Sweeper for lower guide profile (H19 or H25) - OPTIONAL
Completes the floor guide system.
Glass leaf lower shoes - OPTIONAL
For glass leaf sliding.
Glass leaf gripper - OPTIONAL
To Next Page
Loading...
Need help?
General
