FAAC A1000 - 20.6 Selection Menu Navigation

A1000 84 532210 04 - Rev.A
81
82



100% OK
14:30
Translation of the original instructions
ENGLISH
20.6 SELECTION MENU
1. To access the operating mode selection menu, press the corre-
sponding button on the HOME PAGE 81.
2. Using the selection buttons 82 you can set:
- the Automatic or Door open operation
- Two-directional or Exit only mode
- Total or Partial Opening option
3. To go back to the HOME PAGE use the OK button (the selections
displayed are confirmed).
Automatic or Door open opera-
tion
Automatic = opening via detector
Open door = closure is inhibited
Automatic

Door open
Direction of travel
Two-directional = the detectors are
enabled for entry and exit
Exit only = the detector is only
enabled for exit
Entry only = the detector is only
enabled for entry
Two-directional


Exit only

Entry only

Opening percentage
100% = Total opening
% = Partial opening (percentage
that can be modified by the program)
Total opening
100%
Partial opening
%
INTERLOCK operating mode
To access the function
press and hold
the Automatic or Door open button
for 3 seconds.
To enable the mode of operation
the board must be the Master and the
Intercom function must have been set
in Interlock on SDK EVO.
operation selection:
Automatic/Door Open
operation selection :
Interlock
keep the button pressed for
3 seconds to access or exit
from Interlock mode
OK - go back to HOME PAGE (confirm
current selections)
selection:
Two-directional/Exit only
/Entry only
selection:
Total/Partial Opening
Summary of current selections
Menu title
OPERATING MODE
AUTO BIDIR TOTAL
Icons of current selections
operating for example in: automatic /
two-directional / with total opening
A1000
THUR 20/03/14
AUTO BIDIR TOTAL
HOME PAGE
example - automatic operation, only for exit, with partial Opening:


%
example - door open with total opening:
100%