FAAC A1000 - EC Declaration of Conformity of a Machine

A1000 3 532210 04 - Rev.A
Translation of the original instructions
ENGLISH
EC DECLARATION OF CONFORMITY OF A MACHINE
(2006/42/EC ANNEX II P.1, A)
Manufacturer and person authorised to compile the technical file
Company name: FAAC S.p.A. Soc. Unipersonale
Address: Via Calari, 10 - 40069 Zola Predosa BOLOGNA - ITALY
hereby declares that the following machine:
Description: Linear sliding door with 1 or 2 leaves
Model: A1000 CS
complies with the following applicable EU legislations:
Machinery Directive 2006/42/EC (including all applicable amendments)
and that the technical file has been compiled in compliance with part A of Annex VII.
Furthermore, the following harmonised standards have been applied:
EN 16005:2012
EN ISO 12100:2010
EN 60335-2-103:2015
EN 13849-1:2015 PL ”c” CAT. 3
EN 13849-2:2012
Bologna, Italy 10-06-2017 CEO
EC DECLARATION OF CONFORMITY
The Manufacturer
Company name: FAAC S.p.A. Soc. Unipersonale
Address: Via Calari, 10 - 40069 Zola Predosa BOLOGNA - ITALY
hereby declares that the following products:
Description: Automation for linear sliding door with 1 or 2 leaves
Model: A1000 KIT; A1000 PA;A1000 CS
comply with the following applicable EU legislations:
EMC Directive 2014/30/EU
Directive ROHS 2 2011/65/EU
Furthermore, the following harmonised standards have been applied:
EN 61000-6-2:2005
EN 61000-6-3:2007+A:2011
Bologna, Italy 10-06-2017 CEO