A1000 78 532210 04 - Rev.A
Translation of the original instructions
ENGLISH
- from AUTOMATIC ONLY PARTIAL ENTRY
- from AUTOMATIC ONLY PARTIAL EXIT
switches to PARTIAL TWO-DIRECTION AUTOMATIC
- from AUTOMATIC ONLY TOTAL ENTRY
switches to TOTAL TWO-DIRECTION AUTOMATIC
- from PARTIAL NIGHT-TIME
switches to TOTAL NIGHT-TIME
- PARTIAL MANUAL
switches to TOTAL MANUAL
ALARMS
The ALARMS are displayed with a code of flashing LEDs alternating
with the current operating mode.
For the type of ALARM see 23.
6. Other 2-key combinations may be used for the other
special functions.
18.3 SPECIAL FUNCTIONS
RESET:
Reset clears errors in the memory.
It is activated by pressing keys and simultaneously for 5 sec.
The LEDs corresponding to the keys switch on then off.
LOCK/ UNLOCK:
The lock locks and unlocks the keys of the LK EVO
It is activated by pressing keys and simultaneously for 5 sec.
The LOCK/ UNLOCK mode change is displayed by switching on for
300msec then switching off the LEDs corresponding to keys.
WARNINGS:
The warnings are displayed by pressing and holding the keys
and .
The LEDs corresponding to WARNINGS blink for as long as the keys
are held.
To view the type of WARNING 24
FIRMWARE VERSION:
the firmware version of E1400 board can be displayed by pressing
and holding keys and .
To display the FIRMWARE version 25
LOCK / UNLOCK
+
5 sec.
RESET
+
WARNINGS
+
continuous
FIRMWARE VERSION
+
continuous