FAAC A1000 - 20.3 Home Page Navigation; 20.4 Reset, Lock;Release SDK EVO; 20.5 Password Entry and Management

A1000 83 532210 04 - Rev.A
80
14:30
Translation of the original instructions
ENGLISH
set NIGHTTIME
mode
set MANUAL mode switch to the FUNCTIONS menu
go to the SELECTION
menu
- name of the door
- day and date
- operating mode
- time
SDK EVO locked
current indications
20.3 HOME PAGE
The 4 buttons under the display activate the control represented by
the icon located above them 80.
20.4 RESET - LOCK/RELEASE SDKEVO
On the HOME PAGE, Lock/Release SDK EVO or Reset the board by
pressing the 2 buttons indicated simultaneously for 5 s:
5”
5”
RESET
5”
5”
20.5 PASSWORD
The 4 digit PASSWORD has to be entered in order to use some of
the functions.
- select the first digit using the
↑
↓
buttons
- confirm via the OK button and it moves on to the next digit
- once the 4 digits have been entered, the password is recognised
by the device as USER or INSTALLER.

The factory-set password is: 0000
****
ESC
↑
↓
OK
exit and go back to
the HOME PAGE
confirm the figure
select the figure
ENTER PASSWORD
- If the PASSWORD IS NOT RECOGNISED:
- the command is not executed
- the display indicates “INCORRECT PASSWORD”
- press OK to go back to the HOME PAGE.
PASSWORD
INCORRECT PASSWORD
ESC OK
Factory Password
Functions accessible with PASSWORD
USER



 *
INSTALLER




* Some functions are reserved to the installer
timer active
A1000
THUR 20/03/14
AUTO BIDIR TOTAL
HOME PAGE
PASSWORD
0000
ESC OK