FaroArm® Quantum
August 2017
2
Chapter 1: Introduction
It is important that you understand the meaning of the following words before
proceeding.
Warning
A WARNING notice denotes a hazard. It calls attention to an operating
procedure, practice, or event that, if not correctly performed or adhered to, could
result in personal injury or death. Do not proceed beyond a WARNING notice
until the indicated conditions are fully understood and met.
Caution
A CAUTION notice denotes a hazard. It calls attention to an operating
procedure, practice, or event that, if not correctly performed or adhered to, could
result in damage to the product or loss of important data. Do not proceed beyond
a CAUTION notice until the indicated conditions are fully understood and met.
Note
A NOTE notice denotes additional information that aids you in the use or
understanding of the equipment or subject. Specifically, they are not used when a
WARNING or CAUTION is applicable. They are not safety related and may be
placed either before or after the associated text as required.
digitize Indicates the recording of XYZ coordinates of a
point or location in 3D space. The word digitize is
the same as the term measure when referring to
points.
choose or select Indicates that you are initiating an action. For
example, “Select File > Insert > CAD Parts.”
left-click, right-click,
click, or press
Indicates that you press and release the
corresponding mouse button or keyboard key. Also
used when referring to the hardware device buttons.
For example, “After selecting a file from the O
PEN
F
ILE dialog box, click OK to open the file” or
“Press ESC at anytime to cancel a command.”
drag Indicates that you press and hold the left mouse
button down and move the mouse. Release the
mouse button to finish. This word is often used
when changing the size of a window or toolbar.
08m80e00_FaroArm_Quantum.book Page 2 Tuesday, August 22, 2017 11:03 AM
To Next Page
Loading...
