FaroArm® Quantum
August 2017
8
Chapter 1: Introduction
Safety Labels
Notice the following safety labels on your Quantum.
Pinch Points
Labels that indicate pinch points are located on near the joints. Avoid placing
hands and fingers in these pinch points. See
Figure 1-5 for the location of the
pinch point labels.
Precautions
The Quantum is a precision measuring device that is ruggedized for shop use;
however, care must still be exercised in the operating environment when using
the Quantum. Proper operation and care includes avoiding:
• Solvents.
• Abuse, such as dropping or twisting at end stops.
• Moisture and high humidity.
• Power fluctuations. See “Quantum Power Supply” on page 32.
• Excessive temperature changes without appropriate elapsed time. See
“Temperature Considerations” on page 122.
CAUTION: Using the Quantum in a manner not specified by the
instructions in this manual will impair the protection provided by the design
of the product.
Your FaroArm and Laser ScanArm can give you many years of service when you
treat it with care.
Figure 1-5 Pinch Point Labels
08m80e00_FaroArm_Quantum.book Page 8 Tuesday, August 22, 2017 11:03 AM
To Next Page
Loading...
Need help?
General