FaroArm® Quantum
August 2017
60
Chapter 3: Operation
Hole Compensation Method - Guidance
Perform the Hole Compensation using the FARO probe compensation cone. If
the G
UIDANCE check box is selected for the current probe, use the following
steps.
Collect all of the points in this method by holding down the green Front button.
The Quantum will collect points as fast as possible (“scanning”) until you release
Figure 3-35 Hole Compensation with Guidance
08m80e00_FaroArm_Quantum.book Page 60 Tuesday, August 22, 2017 11:03 AM
To Next Page
Loading...
