FaroArm® Quantum
August 2017
77
Chapter 3: Operation
• Centers Cursor - move the cursor to the center of the screen.
• As Right Mouse Button - sends a right mouse button command to the
computer.
• As Center Mouse Button - sends a center mouse button command to the
computer.
• Application Specific - sends a special signal to the application software. The
software can use this special signal to launch any command. For example,
this repeats the last command in CAM2
Measure.
Tracking Speed: Adjust the speed of the cursor is adjusted using the TRACKING
S
PEED slider. Move the slider to the left to decrease, and to the right to increase
the tracking speed. You can also enter a value between 0 and 1000 in the field to
the right of the slider.
Network Configuration
In the NETWORK CONFIGURATION dialog box you can:
• Enable/Disable the Bluetooth transmitter.
• Enable/Disable the WLAN transmitter and change settings.
• Change the Ethernet settings.
08m80e00_FaroArm_Quantum.book Page 77 Tuesday, August 22, 2017 11:03 AM