We hereby declare that the following product conforms with the essential health and safety
requirements of EC Directives and that the product can be incorporated into end-machinery.
To maintain this declaration, the product must not be put into service until the end-machinery
has been declared in conformity with the provisions of the Directives.
Product : Electric Servo Nutrunner
Model No. : AFC3000
Manufacturer : DAI-ICHI DENTSU LTD.
Directives : Machinery Directive 2006/42/EC
EMC Directive 2004/108/EC
The above product has been evaluated for conformity with above directives using the following
European standards. The technical construction file (TCF) for this product is retained at the
above manufacturer’s location and it is complied according to
ANNEX Ⅶ part B.
Machinery Directive
EN ISO12100:2010, EN 60204-1:2006+A1:2009
EMC Directive
EMI EN61000-6-4: 2007+A1:2011
EMS EN61000-6-2: 2005
Low Voltage Directive
EN 61800-5-1:2007 Second Edition
Safety of Machinery
EN60204-1:2006+A1:2009
To Next Page
Loading...
