FLIR T Series User Manual

General
Before you can activate fusion, you must set up a fusion type.
How to set up a
fusion type
Follow this procedure to set up a fusion type:
1 Push the Setup button.
On the menu, select Fusion, using the joystick.2
Push the joystick.3
In the Fusion box, select one of the following:
■
Above
■
Below
■
Interval
■
Picture in Picture
4
Push the joystick to confirm the choice.5
Push the Setup button.6
82 Publ. No. 1558792 Rev. a460 – ENGLISH (EN) – July 1, 2010
17 – Working with fusion

FLIR T Series Specifications

General

Brand	FLIR
Model	T Series
Category	Thermal cameras
Language	English