Versiv Series Cabling Certification Product Family
Users Manual
102
Status LEDs:
A (Auto Focus): With a live image on the display, push to
automatically focus the image.
+ (Test): Push to analyze an endface image. Push again to
return to the Live View screen.
T: Push for 2 seconds to turn on or off the Probe.
L: Push to turn on or off the PortBright LED.
USB type C port.
Use with the USB cord to connect the Probe to the tester.
Use with the USB cord or an approved AC adapter to charge the
Probe. Use an AC adapter to charge the battery faster than with
the USB cord connected to a PC or laptop.
Battery status LED.
USB cord (USB type A to USB type C).
Blue
Two short blinks periodically: The Probe is on but
not connected to a tester.
One short blink periodically: The Probe is connected
to the mobile device, but the app is not active.
Solid: The Probe is connected to a tester and the
tester is on.
Red The test failed.
Green The test passed.
Red and
Green
The test limit is Document Only, so the result does
not have a Pass or Fail status.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
