Fluke Versiv Series - Get Acquainted; Overview of Features

1
Chapter 1: Get Acquainted
Overview of Features
The Versiv and Versiv
™
2 main and remote testers are rugged,
hand-held instruments that you configure to certify,
troubleshoot, and document copper and fiber optic cabling. The
Versiv platform includes these features:
Note
Feature descriptions in the Versiv Series
documentation apply to Versiv and Versiv 2
testers unless stated otherwise.
• Operates with DSX CableAnalyzer
™
modules to certify twisted
pair cabling. See Chapter 2.
• Operates with CertiFiber
®
Pro Optical Loss Test Set (OLTS)
modules to measure optical power loss and length on dual-
fiber, multimode and single-mode cabling. See Chapter 6.
• Operates with OptiFiber
®
Pro OTDR modules to locate,
identify, and measure reflective and loss events in multimode
and single-mode fibers. See Chapter 7.
• Operates with OptiFiber Pro HDR modules to do tests on OSP
(Outside Plant) installations that include optical splitters. See
Chapter 8.
• The optional FI-1000, FI-3000, or FI-3000-NW
FiberInspector
™
Pro video probe connects to the type A USB
port on the main tester to let you inspect the endfaces in fiber
optic connectors. See Chapter 5.
• Gives a PASS or FAIL result based on a test limit that you
specify.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com