Chapter 5: FiberInspector™ Pro Tests
Set up a FiberInspector Test
117
Set up a FiberInspector Test
To set up a FiberInspector test on the tester:
1 On the hom
e screen, tap the test setup panel.
The CHANGE TEST screen shows on the display.
2 To set up a new FiberInspector test, tap NEW TEST.
Or
Select a FiberInspector test, then tap EDIT.
The TEST SETUP screen shows.
3 If necessary, tap Module.
4 Tap FiberInspector Pro.
5 Tap the panels to change settings for the test. See Table 6.
Note
To set up a project, which includes test settings,
cable IDs, and an operator name, see Chapter 13.
6 Tap SAVE.
7 On the CHANGE TEST screen, if necessary, select the radio
button next to the test and tap USE SELECTED.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
