Fluke Versiv Series - HDR OTDR Results; Eventmap

Versiv Series Cabling Certification Product Family
Users Manual
268
HDR OTDR Results
Notes
The tester shows measurements with “>” or “<“
when the actual value is possibly more or less than
the value shown. For example, this can occur for
hidden events or for measurements that are out
of the range of the tester.
When a test is completed, the type of screen the
tester shows first (EventMap, TABLE, or TRACE) is
the type you looked at last.
EventMap
Notes
The EventMap combines the results for all
wavelengths used for the test. If an event on the
EventMap does not show on the event table or OTDR
trace, change the wavelength on the OTDR screen.
The EventMap does not show ghosts.
See Figure 102.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com