Fluke Versiv Series - FI-3000 Probe Setup

Versiv Series Cabling Certification Product Family
Users Manual
106
FI-3000 Probe Setup
Attach the appropriate tip to the Probe.
To attach the single fiber adapter and single fiber tip to the
Probe:
1 Align the slot in the single fiber
adapter with the alignment
pin on the end of the Probe. See Figure 42.
2 Turn the silver ring
on the Probe to secure the adapter to the
Probe.
3 Align the slot in the single fiber tip with the alignment pin on
the adapter.
4 Turn the ring on the adapter to secure the tip to the adapter.
Figure 42. Single Fiber Tip Attachment
1
2
3 4
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com