Fluke Versiv Series - How to Remove and Install the Connector Adapters

Versiv Series Cabling Certification Product Family
Users Manual
138
How to Remove and Install the Connector
Adapters
You can change the connector adapters on the input ports of the
modules to connect to SC, ST, LC, and FC fiber connectors. You
can remove the adapter on the output port to clean the fiber
endface in the port. See Figure 54.
GPU135.EPS
Figure 54. How to Remove and Install the Connector Adapters
LC
SC
Keep extra adapters in
the containers provided.
WCaution
Do not touch the
photodiode lens.
WCaution
Turn only the collar on the
adapter. Do not use tools to
remove or install the adapters.
Slot
Key
Key
Slot
Put the key into the slot
before you turn the collar
on the adapter.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com