Versiv Series Cabling Certification Product Family
Users Manual
328
To add results from a different test
1 On the home s
creen, tap the test setup panel.
2 On the CHANGE TEST screen, tap the button next to a test,
then tap USE SELECTED.
• If the ID set has a Last ID, the home screen shows the first
ID in the set that does not have results for the test you
selected.
• If the ID set does not have a Last ID, tap the Next ID panel,
tap the Next ID box on the CHANGE ID screen, enter the
first ID for the set of saved results, then on the CHANGE ID
screen, tap DONE.
3 Tap TEST or press , then save the result.
How to Replace a Saved Result that Failed
To use the same test settings that were used for the saved result
1 On the home screen, tap the RESULTS icon.
2 On the RESULTS screen, tap a result that failed.
3 Tap TEST AGAIN.
4 When the test is completed, and if Auto Save is on, the tester
asks you if you want to overwrite the results. Tap Yes.
If Auto Save is off, tap FIX LATER (if the test failed) or SAVE (if
the test passed) to save the result.
To replace a result with a result that uses different test settings
1 Turn off Auto Save.
2 Make sure that the home screen shows the project that
contains the result you want to replace.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
