131
Chapter 6: Certify Fiber Cabling
WWarningX*
Before you use the tester, read the safety
information that starts on page 6.
Overview of Features
The Fluke Networks CertiFiber
®
Pro Optical Loss Test Set (OLTS)
modules attach to Versiv
™
and Versiv 2 main and remote units to
make rugged, hand-held testers that let you certify, troubleshoot,
and document optical fiber cabling installations. The testers
include these features:
• Measures optical power loss and length on dual-fiber,
multimode cabling at 850 nm and 1300 nm (CFP-MM) or on
dual-fiber single-mode cabling at 1310 nm and 1550 nm
(CFP-SM). The four-wavelength module (CFP-QUAD) measures
at 850 nm, 1300 nm, 1310 nm, and 1550 nm.
• Interchangeable connector adapters on input and output
ports let you make reference and test connections that agree
with ISO standards for most SFF (small form factor)
connectors.
• Visual fault locator helps you find breaks, bad splices, and
bends and verify fiber continuity and polarity.
• Optional FiberInspector
™
video probe lets you inspect fiber
endfaces and save the images in test reports.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
