Fluke Versiv Series - Use an Updated Main Tester to Update Other Testers

Versiv Series Cabling Certification Product Family
Users Manual
362
Use an Updated Main Tester to Update Other Testers
1 Turn on both testers and connect the AC adapters to both
testers.
2 Use the USB cable provided to connect the updated main unit
to the remote or to another main. See Figure 131.
3 Follow the instructions shown on the display of the updated
main unit.
Note for Versiv remotes
If a remote has newer software than the main
unit, the main unit can install the older software
in the remote so that you can use the two units
together. The remote cannot install the newer
software in the main unit.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com