Maintenance
Update the Software
361
Note
Older versions of LinkWare PC do not start the
update procedure automatically. For older
versions, you must have the update file on a disk
or USB drive and click to start the update
procedure.
4 The tester reboots when the update is completed. To make sure
the update was installed correctly, tap the TOOLS icon on the
home screen, tap Version Information, then make sure the
correct version shows.
5 Do steps 2 through 4 again for the remote. On a remote
tester, the LEDs show the progress of the installation.
GPU46.EPS
Figure 130. How to Connect the Tester to a PC
Micro USB
port
Type A
USB port
AC
adapter
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
